Types of patching and resurfacing road and footway treatments
Road treatments
We use a range of patching and resurfacing road treatments. We choose which treatment is the most appropriate in each situation and will give best value for money in the long term.
The following checkboxes are used for accordion drop-downs. When selected, they show content that was visually hidden
Patching
We patch roads and most pavements using asphalt or other materials.
Patching work can cover both the surface layer of the road and the layers below the surface, depending on what is needed to give the road strength and stability.
Where a road is scheduled for surface dressing work, we pre-patch in advance to give a smooth and structurally sound surface for the surface dressing treatment.
We may pre-patch years before the main work, because patching is often enough to solve immediate issues. We sometimes pre-patch the same area more than once.
For pavements on older housing estates, we sometimes use micro-asphalt patching. This is a cost- effective and successful treatment for pavements originally laid with thin surfaces that were too thin and have worn away. Newer housing estates don't normally suffer this problem because the standards developers must meet have been improved.
We can do patching work when weather conditions are suitable. The length of time it takes to do patching work depends on the depth we need to work down to and the quantity of material we need to replace.
Surface dressing
Surface dressing adds a new layer on top of an existing road surface. It is a well-established and cost-effective preventative maintenance treatment.
We use surface dressing where a road is still structurally sound but the surface is causing issues for road users. The treatment both restores the road surface and adds a waterproof layer that protects the road from water and frost damage.
Restoring the surface increases skid resistance and improves the appearance of the road. Protecting the road from damage minimises the need for maintenance visits and disruption and keeps roads stronger for longer, reducing the need for expensive resurfacing work (resurfacing can cost up to 10 times as much as surface dressing).
When we programme a road for surface dressing, we patch particular problem areas first to give a suitable base on which to lay the new surface. Patching can take place several years before the surface dressing work.
We use both conventional and micro-asphalt surface dressing, depending on the circumstances.
Conventional surface dressing
For conventional surface dressing, we spray the road surface with bitumen and press in new stone chippings with a roller. On major roads, we apply two layers of both bitumen and chippings.
Micro-asphalt surface dressing
Micro-asphalt is a mix of bitumen binder and stones suspended in water with cement or hydrated lime. You might also come across the term ‘grip fibre’ - micro-asphalt with fibres added for extra stretch and strength.
Micro-asphalt goes on in 2 layers, each about 5mm. The first layer helps to fill cracks and smooth out dips, and the second gives the surface texture. The mix is blended on site and pumped onto the road.
Because the material is viscous, it does sometimes flow so that it’s a bit thicker against the kerbs than in the middle of the road.
The new surface is very black and can look messy, but it will gradually settle down and look normal again.
Surface dressing work takes place in the summer, because both types of surface dressing need warm dry weather (though micro-asphalt can tolerate cooler weather than conventional surface dressing). If the weather is not suitable, we might have to change planned dates or stop work and come back later.
Surface dressing normally takes 1 to 2 days. Micro asphalt can be quicker because it is laid cold and strengthens quickly. This means it can be ready for traffic within a few hours, though it continues to cure (harden) for some time after.
Resurfacing
When more than just the very top layer of a road surface is in poor condition, the road will need resurfacing to make it structurally sound again.
On most roads, resurfacing involves removing the layers that are in poor condition and replacing them. This is called an inlay. On country roads where there are no kerbs or properties, we may be able to simply add a new surface on top of what’s there – an overlay.
Where we need to remove an existing surface, we bring in a planing machine to chew up the old surface using a rotating drum covered in teeth.
To lay a new surface, we first clean the road and spray it with bitumen to help the new surface stick. We then use a paving machine to lay a controlled thickness of hot asphalt onto the road.
As part of the work, we sometimes need to dig or plane deeper to fix structural problems. These problems are typically caused by blocked gulleys or by trench digging and reinstatement.
We can do full road resurfacing at any time of year. The length of time it takes to do resurfacing work depends on the depth we need to work down to and the quantity of material we need to replace.
Footway treatments
We use a range of patching and resurfacing footway treatments. We choose which treatment is the most appropriate in each situation and will give best value for money in the long term.
The following checkboxes are used for accordion drop-downs. When selected, they show content that was visually hidden
Road repairs - related issues
The following checkboxes are used for accordion drop-downs. When selected, they show content that was visually hidden
Loose chippings
Surface dressing results in loose chippings because the process needs extra chippings to make sure there is an even spread of stones across the whole area.
We sweep the loose chippings before re-opening the road and after 7 days. We may sweep again if needed. We don't need to close the road again for sweeping. Some loose chippings may still remain after sweeping and other chippings may come loose after we have swept.
There is a 20mph speed limit for the first 24 hours to prevent any accidents caused by chippings.
The loose chippings bed in as traffic passes over. Bedding-in can take some time. Where we surface dress at the end of August, the bedding process lasts through the winter.
Road markings
When we have laid a new road surface, we put temporary signs up to warn drivers that there are no road markings. We normally restore the markings within a week after finishing the work. Junction markings are the first priority. We do need to close the road to do the work, so we may delay restoring the markings if the road is shortly due to be closed for some other reason and we can do the work at the same time.
Ironwork
When a new road surface is higher than the previous one, we raise ironwork such as drain and manhole covers to match. We are using a strong asphalt laid around the cover, to give better results.
We replace or repair any damaged iron work as part of the project.
Closing the road and fixing times for road repair work
To protect both workers and road users, we close the road when we do surface treatment and resurfacing work. For pothole repair, we can usually keep the road open but may need temporary traffic lights or stop/go signs. Where possible, we only close roads during non-peak times.
We plan timings for repair work to co-ordinate with other work planned on the road (for example, work by gas, electricity or water companies). This might mean it takes longer for us to do the work - but we only have to close the road once.
To find out more about what happens when we close a road, see managing road closures.
Policies
Our programme of road and pavement repairs and improvements follows the priorities set through our well managed highways infrastructure and highways asset management approaches.
Contact Highways
Highways - Cheshire East Council Report a problem online
If you consider a highways issue to be dangerous, or an emergency:
Call the Highways Customer Services Team on 0300 123 5020
during office hours 8:30am – 5:00pm
Call the Out of hours team on 0300 123 5025
after 5pm and before 8:30am, including weekends.
Highways
Floor 6
Delamere House
Delamere Street Crewe
Cheshire
CW1 2LL
Open or close Cecilia chat bot
Page last reviewed: 30 April 2024
Thank you for your feedback.